Product Description

WaterWell Drop & Vac is a granular flocculant (alum powder) designed to eliminate cloudy water, remove suspended particles, and settle dead algae to restore crystal-clear pool water. This high-performance formula coagulates debris, causing it to sink to the bottom, making it easy to vacuum out of the pool for a visibly cleaner and healthier swimming environment.

If your pool water appears hazy, murky, or full of algae, Drop & Vac provides a fast and effective solution. Ideal for use after algae treatment or following heavy rainfall, this product helps restore clarity by binding particles together for easier removal.

Key Features & Benefits

✔ Eliminates Cloudy Water

• Quickly clears hazy, dull, or milky-looking pools by settling suspended particles.

✔ Removes Dead Algae & Debris

• Perfect for post-algae treatment—flocculates dead algae to be vacuumed out.

✔ Fast-Acting Formula

• Works within 12–24 hours, allowing quick restoration of water clarity.

✔ Granular Flocculant for Heavy-Duty Cleaning

• Coagulates fine dust, dirt, and debris, ensuring a deep clean.

✔ Easy to Use – No Complicated Procedures

• Simply adjust pool chemistry, distribute, and let it work—then vacuum to waste.

✔ Ideal for Algae Infestation Recovery

• Helps remove stubborn algae remnants, ensuring a fresh and inviting pool.

✔ Works on All Pool Types

• Suitable for chlorine, saltwater, and freshwater pools.

How to Use Drop & Vac Flocculant

1️⃣ Adjust Pool Chemistry

• pH should be at 7.8
• Total Alkalinity should be above 100 ppm

2️⃣ Turn Off the Pump

• Allow the water to remain still for optimal settling.

3️⃣ Broadcast Drop & Vac Over the Pool Surface

• Evenly distribute the granular flocculant across the entire pool area.

4️⃣ Wait for 12 – 24 Hours

• Do not run the pump—allow debris and flocculated particles to settle.

5️⃣ Manually Vacuum to Waste

• Use an 8-wheel sweeper to vacuum out settled debris directly to waste (not through the filter).

Recommended Dosage

• Use as needed to clear murky water
• Apply after algae treatment to remove dead algae and debris
• Reapply if necessary for extreme cases of pool contamination

When to Use WaterWell Drop & Vac?

✅ After Heavy Rainfall – Helps remove dirt, dust, and organic debris.
✅ After Algae Treatment – Binds and settles dead algae for easy removal.
✅ For Cloudy or Murky Water – Coagulates fine particles for improved filtration.
✅ Before Pool Opening or Closing – Clears seasonal build-up and debris.

Why Choose WaterWell Drop & Vac?

✅ Powerful Flocculant – Quickly settles fine particles, debris, and dead algae.
✅ Proven Water Clarity Solution – Clears cloudy pools fast, ensuring sparkling results.
✅ Easy to Apply – No complicated setup—just apply, wait, and vacuum.
✅ Works on All Pool Types – Effective in chlorinated, freshwater, and saltwater pools.
✅ Cost-Effective – Reduces the need for excessive filtration and chemical use.

Frequently Asked Questions (FAQs)

Q: How long does it take for WaterWell Drop & Vac to work?
A: 12 – 24 hours—allowing debris and particles to fully settle before vacuuming.

Q: Do I need to run my pool pump after applying Drop & Vac?
A: No—turn off the pump for optimal settling before vacuuming.

Q: Can I use this in a saltwater pool?
A: Yes—it is safe for chlorine, saltwater, and freshwater pools.

Q: What happens if I don’t vacuum the settled debris?
A: The debris will remain at the bottom, and swimmers can stir it up again, causing the pool to become cloudy. Vacuuming to waste is essential for best results.

Q: Can I swim after adding Drop & Vac?
A: No, wait until after vacuuming the settled debris before resuming swimming.